|
SSMP is a transformer-free solid-state preamp specially designed for high-quality microphones. It adopts a proprietary gain circuit design and a high-quality PCB. With SSMP, your microphones will develop a very detailed and dynamic sound.
All this in the solid and reliable chassis, typical of the BOX LINE series. Our accurate construction process guarantees SSMP a perfect and high quality operation for decades, respecting the environment thanks to its long life and the wide use of noble metals and reducing that of polluting materials.
All this in the solid and reliable chassis, typical of the BOX LINE series. Our accurate construction process guarantees SSMP a perfect and high quality operation for decades, respecting the environment thanks to its long life and the wide use of noble metals and reducing that of polluting materials.
|
|
SSMP is equipped with 48V, Low Cut, and Phase switches. SSMP 48V complies with the most stringent standards, offering the 10mA needed to perfectly meet the requirements of the most demanding professional microphones.
It has two gain controls: a Gross one with 10dB steps and one Fine with 1dB steps, thus allowing you to perform very accurate level settings... Easily recallable for any future session with the same artist! The LED ON turns on when you press the back panel power switch. The rear panel includes two reliable and high-quality XLR3 connectors.
It has two gain controls: a Gross one with 10dB steps and one Fine with 1dB steps, thus allowing you to perform very accurate level settings... Easily recallable for any future session with the same artist! The LED ON turns on when you press the back panel power switch. The rear panel includes two reliable and high-quality XLR3 connectors.
Frequency Response
|
|
Features
|
|
1 |
48V Phantom Power |
2 |
Low-Cut/High Pass Filter (80 Hz / 12 dB/Oct |
3 |
Stepped Gross Gain Control |
4 |
Stepped Fine Gain Control |
5 |
Power LED |
6 |
Phase Inversion Switch (0°/180°) |
7 |
XLR3M Mic Balanced Input |
8 |
XLR3M Mic Balanced Output |
9 |
24V DC Inlet |
10 |
Power Switch |
Technical Specifications
Product Topology: |
Solid State Linear Amplifier |
Input Impedance: |
600 Ω |
Number of Inputs: |
1 |
Frequency Response: |
15 Hz - 300 kHz (-3dB) |
Overall Gain: |
0-69 dB |
Gross Gain: |
Calibrated, 10 dB each step |
Fine Gain: |
Calibrated, 1 dB each step |
Total Harmonic Distortion: |
< 0.05% |
Input: |
Top quality active balanced circuit |
Output: |
Transformerless solid state balanced driver |
Construction: |
Aluminum |
Finish: |
Durable Powder Coating |
Power: |
External 24V DC |
Size: |
185 x 99 x 50 mm / 7.28" x 3.9" x 1.97" |
Weight: |
500 Grams / 1.1 Lbs. |
Operating Conditions: |
5°~40° C / 41°~104° F |
Warranty: |
2 Years |
