|
Epic 55
Mid-Field Studio Monitor
|
Tower of Power
Sometimes you need a bigger speaker. The Epic 55 precision mid-field studio monitor is that speaker, just released from the reProducer R&D labs! This double-headed beast was a natural evolution of our product line, based on the outstanding reception and feedback for our Epic 5 near-field monitor. We went back to the labs and took it to the next level – literally. This stunning tower houses twin 5.25” woofers, paired with a single 1” tweeter – both crafted in the reProducer labs. The Epic 55 will delight your senses as it accurately reproduces your mix. Like its smaller sibling, all in-phase design and pure analog signal routing mean low distortion, fast transient response, high dynamic range, flat phase response, and no need for DSP manipulation. The Epic 55 is tailored to larger rooms than the Epic 5, and really enhances the low-end in your mix. It brings the same precision sound quality. Just louder. The Epic 55 is suitable for vertical/upright – as well as for horizontal/flat operation. |
Passive Aggressive
The Epic 55's port-less dual (one on the top, one on the bottom) passive radiator design maximizes bass while eliminating air-flow noise.
The Epic 55's port-less dual (one on the top, one on the bottom) passive radiator design maximizes bass while eliminating air-flow noise.
Heart of a Thoroughbred
A high-current, high-damping, ultra-low noise Class D amplifier provides 120W RMS to twin 5.25” woofers and 75W RMS to 1” tweeters of our own design, providing fast transient response, and exceptionally transparent sound reproduction. Adustable gain, and high/low frequency trim let you harness this power and tune it to your space.
A high-current, high-damping, ultra-low noise Class D amplifier provides 120W RMS to twin 5.25” woofers and 75W RMS to 1” tweeters of our own design, providing fast transient response, and exceptionally transparent sound reproduction. Adustable gain, and high/low frequency trim let you harness this power and tune it to your space.
Pairs Nicely
Epic 55 is the perfect companion to our Epic 5 near-field monitor,
providing your studio with full-spectrum frequency coverage.
Epic 55 is the perfect companion to our Epic 5 near-field monitor,
providing your studio with full-spectrum frequency coverage.
Technical Info
Frequency Response: |
40 Hz-30 kHz ±3dB |
Frequency Response: |
35 Hz-30 kHz ± 10dB |
Amplifier Power: |
1 x 75W RMS, 2 x 120W RMS |
Amplifier Technology: |
Class D, 115dB Dynamic Range, High current and Damping, Response up to 100kHz, ultra low noise |
Max. Sound Pressure (pair, 1m): |
112 dB(C) SPL |
Power Supply: |
Universal 100-240VAC, 50/60Hz |
Power Consumption (max): |
200 VA |
Woofer: |
5.25" x 2 - own design for fast transient, free of parasitic response |
Tweeter: |
1"- own design, metal dome with rear chamber |
Crossover: |
2.5kHz, 24dB/Octave |
Input Impedance balanced (XLR): |
12kOhm |
Input Sensitivity balanced (XLR): |
+4 dBu |
Room Correction High: |
± 5 dB in 1 dB Steps above 2.5kHz |
Room Correction Low: |
± 5 dB in 1 dB steps below 250Hz |
Standby |
On/Off Switchable |
Dimensions without Spikes (Vertical): |
515 (H) x 190 (W) x 320 (D) mm |
Dimensions with Spikes (Vertical): |
535 (H) x 190 (W) x 320 (D) mm |
Frequency Response
Measured in Anechoic Chamber at a distance of 1m.
Measured in Anechoic Chamber at a distance of 1m.
Image Gallery
