|
"A beautifully detailed, highly portable,
great sounding monitor, custom made for small spaces... The bottom ported radiator gives them a gentle haptic thump that I quite enjoy.” – Paul Vnuk Jr. Editor-in-Chief RECORDING Magazine 
|
Epic-5
2-Way Biamplified Studio Speaker System
reProduce Your Style!
reProducer Audio's Epic 5 Studio Speaker system was designed and built with infatuation in every detail – if every element fulfills its task 100% – then there is no need for compromises! Obsession with detail means using our own high-frequency driver, passive radiator as well as the amplifier and the housing. And so nothing is left to chance, we designed our own feet too! Control down to the depth of Hertz. All connections and adjustments. Position your Epic 5 where you need it. Fall in Love...
Features
reProducer Audio's Epic 5 Studio Speaker system was designed and built with infatuation in every detail – if every element fulfills its task 100% – then there is no need for compromises! Obsession with detail means using our own high-frequency driver, passive radiator as well as the amplifier and the housing. And so nothing is left to chance, we designed our own feet too! Control down to the depth of Hertz. All connections and adjustments. Position your Epic 5 where you need it. Fall in Love...
Features
- 2 way studio speaker system Epic-5
- Bi-amping with 2x75W RMS / 150W peak
- 1 "ultralight dome tweeter, self-developed
- 5.25 "woofer, self-development
- 6.25 "passive radiator with special coating, own development
- H x W x D: 270 x 190 x 240 mm
- With spikes and silicone pads to protect delicate surfaces
Love in Every Detail – A Construction that Tells a Love Story!
Pictures can speak volumes. Take a look at what goes into these amazing studio monitors. Do these images speak to you?
Pictures can speak volumes. Take a look at what goes into these amazing studio monitors. Do these images speak to you?
Technical Info
- Frequency response: 56-33,000 Hz ± 3dB
- Frequency response: 45-38,000 Hz ± 10dB
- Amplifier power: 2 x 75W rms, 2 x 150W peak
- Amplifier technology: Class D, with 115dB dynamics, high current capability, very good attenuation factor, linear to over 100kHz, very low noise
- Maximum sound pressure per pair in full space in 1m of 100Hz: 109 dB (C) SPL
- Power supply: Worldwide 100-240VAC, 50/60 Hz
- Maximum current consumption: 200 VA
- Woofer: 5.25", self-developed, super fast, resonance free
- Tweeter: 1", self-developed, metal calotte with resonance chamber
- Crossover frequency: 2 kHz, 24dB / oct
- Input impedance balanced (XLR): 12 kOhm
- Input impedance unbalanced (RCA): 3.3 kOm
- Input sensitivity symmetrical (XLR): +4 dBu
- Input sensitivity unbalanced (RCA): -10 dBV
- Room Correction Höchen: ± 5 dB in 1 dB increments from 2.5 kHz
- Room correction depths: ± 5 dB in 1 dB steps below 250 Hz
- Dimensions without spikes: 270 x 190 x 240 mm
- Dimensions with spikes: 310 x 190 x 240 mm
- Weight per unit: 5.2 kg
|
Free-Field Frequency Response
Measured in Schalltoten space at 1m distance 
|
Horizontal Radiation Behavior
Measured in Schalltoten room at 1m – at 0 °, 10 °, 20 °, 30 ° and 40 ° 
|
|
Cumulative Decay Spectrum
Measured in Schalltoten space in 20cm distance, time axis: 0ms 
|
Jump Response Curve
At a distance of 1 m to assess the temporal behavior of drivers 
|
|
Acoustic Phase
Very flat middle frequency range, measured at 1m distance |
THD
Measured 30cm apart at a level of 94dB SPL |
|
|
Reviews
|
|
|
|
