BOX LINE DSMP
DSMP is a transformerless dual-channel solid-state mic preamplifier specially designed for high-quality microphones. It adopts a new generation design of proprietary revenue circuit and a high-quality PCB. With DSMP TEKNOSIGN, your microphones will develop a very detailed and highly dynamic sound, giving you a very clear and smooth shot. All this in the solid and reliable chassis, typical of the BOX LINE series.
It has two gain controls: a Gross one with 10dB steps and one Fine with 1dB steps, thus allowing you to perform very accurate level settings... Easily recallable for any future session with the same artist! The LED ON turns on when you press the back panel power switch. The rear panel includes two reliable and high-quality XLR3 connectors.
Our accurate construction process guarantees DSMP a perfect and high quality operation for decades, respecting the environment thanks to its long life and the wide use of noble metals and reducing that of polluting materials.
Features
1 |
Stepped Gross Gain Control |
2 |
Stepped Fine Gain Control VU-Meter |
3 |
VU-Meter |
4 |
48V Phantom Power Switch |
5 |
Low Cut Switch |
6 |
High Cut Switch |
7 |
Phase Inversion Switch |
8 |
Power LED |
9 |
XLR3F Mic Balanced Input Connectors |
10 |
XLR3M Mic Balanced Output Connectors |
11 |
24V DC Inlet |
12 |
On/Off Power Switch |
Technical Specifications
Product Topology: |
Solid State Linear Amplifier |
Input Impedance: |
600Ω |
Number of Inputs: |
1 |
Frequency Response: |
15 Hz – 300 kHz (-3dB) |
Overall Gain: |
0 – 69 dB |
Gross Gain: |
Calibrated, 10 db Each Step |
Fine Gain: |
Calibrated, 1 db Each Step |
Total Harmonic Distortion: |
< 0.05% |
Input: |
Top Quality Active Balanced Circuit |
Output: |
Transformerless Solid State Balanced Driver |
Phantom Power: |
48V DC |
Low Cut Filter: |
80 Hz, 12 db/Oct |
High Cut Filter: |
10 Hz, 6 db/Oct |
Output Phase: |
0°/180° |
Gain Control: |
Two selectors (x 10 dB and x 1 dB) |
Input Connector: |
XLR3F |
Output Connector: |
XLR3M |
XLR Configuration: |
AES Standard (Pin Hot: 2) |
Construction: |
Aluminum |
Finish: |
Durable Powder Coating |
Power: |
24V DC |
Size (L x W x D): |
220 x 180 x 65 mm / 8.66" x 3.9" x 2.56" |
Weight: |
500 Grams / 1.1 Lbs. |
Operating Conditions: |
5° ~ 40° C / 41° ~ 104° F |
Warranty: |
2 Years |
