|
Main Features
|
|
Power:
280 + 45 W
|
Frequency Range:
53 Hz – 23 kHz
|
Peak Max. SPL@1m:
117 dB
|
Listening Distance:
1.2 to 3.5 m
|
The Perfect Immersion in Your Studio
Only you know where your story begins, and who knows where it will take you? The A214-M can help you define that “where” – by enhancing your surround setup with an optimized center speaker.
The sound that has earned PSI Audio the respect of audio professionals all around the world is primarily defined by accuracy and hence its natural reproduction, playing back sound without altering it. The A214-M perfectly translates these qualities into a speaker ideally suited for the central position in immersive audio applications. Get all the fine details of the voices in the dialogue, hear that little rasp, that hint of a lisp introduced by the compressor. Start hearing if anything is just slightly off in the voices immediately, identify the source and create better results in less time. The A214-M gives you all the information you need. |
|
|
“The A214-M is the perfect solution for a center speaker in my setup.
The horizontal design leaves enough space for a large display. In addition, there is of course the outstanding sonic precision, as you would expect from PSI Audio.” – Christian Schäppi Soundengineer.ch |
True D’Appolito Design
The 214-M was developed to be a compact central speaker with sound pressure maximized more than bandwidth.
A tweeter and 2 woofers in D’Appolito configuration in an extremely compact cabinet but capable of astonishing sound pressure levels. |
|
A214-M – The Powerful CenterpieceThe A214-M is the ideal center speaker for surround systems. Its power and precision make it the perfect choice for discerning post-production studios and film mixing suites.
Most common surround setup: A21-M as L+R, A14-M as surround, A214-M as center, Sub A225-M as LFE. Thanks to our phase compensation on the whole range of monitors, these can be mixed and matched in any immersive setup. |
|
Technical Data
Item |
|
Potential Peak Power |
290 + 55 W |
Continuous Max SPL @1m |
102 dB |
Short Term Nax. SPL @1m |
106 dB |
Peak Max. SPL @1m |
115 dB |
Signal to Noise Ratio (S/N) |
98 dBA |
Bandwidth at -6dB |
36-23'000 Hz |
SPL Tolerances |
±2.0 dB |
Phase Tolerances |
± 45 (250 Hz – 20 kHz) deg |
Dispersion (H x V) |
(P.N. 4 - 16 kHz) at -6 dB: 80° x 60° (H x V) |
System |
2 way |
Crossover Frequency |
1.8 kHz |
Woofer Ext. Diam. |
147 mm |
W. Diaphragm Diam |
104 mm |
Tweeter Ext. Dim. |
100 mm |
T. Diaphragm Diam. |
27 mm |
Dimensions W x H x D |
166 x 1110 x 230 mm |
Net Weight |
15 Kg |
Input Connector |
1 x XLR F / 3P |
Material |
MDF |
Voltage |
115/230V (50-60 Hz) |
Warranty |
5 (+1) years |
Flat Response
Each speaker is individually calibrated in our anechoic chamber and is delivered with its frequency response sheet. A proof of quality.
|
|
A214-M – The perfect monitor for surround setups
The A214-M is primarily designed as a center speaker for surround systems. Its power is optimized to satisfy the requirements of post-production and film mixing suites. The small cabinet allows it to be used in surround systems where space is an issue such as below a screen.
A-14M
|
A-14M
|
A-17M
|
A-21M
|
A-23M
|
A-25M
|
A-215M
|
A-214M
|
A-125M Sub
|
A-225M Sub
|
Click on a picture to choose a product from our coherent range of monitors.
A214-M – Who is it For?
Wherever a center speaker is required, that is where the A214-M belongs. Surround mixing setups of any sort from 5.1 systems to sophisticated immersive audio constructions, a center speaker is usually required.
The A214-M fills this very position perfectly and integrates well with other PSI Audio speakers to create a consistent listening line-up. |
|
Handmade in Switzerland
|
All our products are handcrafted in Switzerland with passion and attention to detail.
Manufacturing by hand allows to match and adjust components so that tolerances cancel each other out instead of building up, as is often the case in industrial production. |
Choose Your Color
Choose between Studio Red, Metal Black, and Pure White. Cabinets are manufactured with great care and attention from the choice of the wood all the way through to the paintwork.
|
|
